832-709-0236
English EN Spanish ES
Feb 18 2026
🔥❄️ Furnace Keeps Clicking But Won’t Start? Don’t Keep Resetting It ❄️🔥

🔥❄️ Furnace Keeps Clicking But Won’t Start? Don’t Keep Resetting It ❄️🔥

If your furnace keeps clicking or repeatedly tries to start but never fully turns on, it’s usually an ignition/safety problem. Most furnaces will attempt to ignite a few times, and when they don’t “prove” flame correctly, they shut down to protect your home and the equipment. That’s why clicking often turns into no heat.

At Uptown Heating & Air Conditioning, we find the real cause fast and restore safe, steady heat.

⚠️ Common Signs
✔️ Clicking sounds and repeated start attempts
✔️ Blower may run, but burners never stay on
✔️ Heat comes on for a few seconds, then shuts off
✔️ Furnace locks out and stops trying until reset

⚠️ Most Common Causes
✔️ Weak ignitor / ignition failure
✔️ Dirty flame sensor (burners light then shut down)
✔️ Gas supply or gas valve issues
✔️ Dirty burners / clogged orifices
✔️ Pressure switch or venting problem
✔️ Control board or wiring issue

🚫 Avoid This: Constantly turning it off/on or resetting it. Repeated failed ignition cycles can cause lockouts, more wear, and bigger repairs.

🛠️ Why Homeowners Choose Uptown
⭐ Licensed HVAC professionals
⭐ Full ignition + safety diagnostics
⭐ Honest, clear recommendations
⭐ Service for all major furnace brands

📅 Schedule your furnace check today!
📍 Houston, Katy, Cypress, Spring, Tomball & surrounding areas

🔖 Hashtags
#UptownAC #FurnaceRepair #NoHeat #HoustonHVAC #HeatingService
#HomeComfort #WinterReady #HVACTech #UptownHeatingAndAir

Uptown Heating & Air Conditioning 0 Comments
Feb 18 2026
🔥❄️ Furnace Blowing “Too Hot” Air? Overheating Can Damage the System ❄️🔥

🔥❄️ Furnace Blowing “Too Hot” Air? Overheating Can Damage the System ❄️🔥

If your vents feel scorching hot, your house overheats fast, or the furnace keeps cycling on and off, your system may be running too hot because of airflow restrictions or incorrect setup. A furnace should produce strong heat, but it also needs the right airflow to carry that heat away safely. When it can’t, the furnace can overheat and trip safety limits—leading to short cycling, higher bills, and premature part failure.

At Uptown Heating & Air Conditioning, we check airflow, temperature rise, and safety controls to keep your heat comfortable and safe.

⚠️ Common Signs of an Overheating Furnace
✔️ Very hot air from vents (feels “too hot”)
✔️ Furnace shuts off before reaching the set temp
✔️ On/off every few minutes (short cycling)
✔️ Burning/hot smell during operation
✔️ Rooms feel uneven—some too hot, some still cold
✔️ Filter gets dirty fast or collapses inward

⚠️ Most Common Causes
✔️ Dirty/clogged air filter restricting airflow
✔️ Closed vents or blocked returns (furniture/rugs)
✔️ Dirty blower wheel / coil buildup reducing airflow
✔️ Wrong blower speed or airflow settings
✔️ Duct restrictions/leaks causing poor distribution
✔️ Oversized furnace heating too fast for the duct system

💡 Quick Tip: Replace the filter and open all vents/returns. If it still overheats or short cycles, it needs a professional airflow check.

🛠️ Why Homeowners Choose Uptown
⭐ Licensed HVAC professionals
⭐ Temperature rise + airflow diagnostics
⭐ Safety limit/control testing
⭐ Honest, clear recommendations
⭐ Service for all major furnace brands

📅 Schedule your furnace check today!
📍 Houston, Katy, Cypress, Spring, Tomball & surrounding areas
💡 Overheating is a safety warning — don’t ignore it.

🔖 Hashtags
#UptownAC #FurnaceRepair #Overheating #HoustonHVAC #HeatingService
#HomeComfort #WinterReady #HVACTech #UptownHeatingAndAir

Uptown Heating & Air Conditioning 0 Comments
Book Now